Products

Submitted
Thank you for your request. Our managers will contact you as soon as possible
Закрыть

ATZ 36135-0000011

Add to Comparison Order
Version for Print
Description
Characteristics
Pickings
Сapacity
4,9 м³
Section
Ellipse of constant section
Compartment
1–2
Chassis
ГАЗ-3309
The ATZ 36135-0000011 refueller is designed for transportation, short-term storage and refueling of light oil products with a density of no more than 0.83 t / m3 and is a measure of the total capacity. The tank has flat-bent, flanged bottoms and the same shape of the reinforcement ribs (breakwaters) inside the body. This design prevents the occurrence of a shocks. In order to avoid the formation of air cavities when the tank is filled with fuel along the upper generatrix of the cistern, air discharge tubes are installed, the ends of which are withdrawn to each neck above the measuring gon.
Tank material Steel 09G2S
Dencity of the product 0,74 t / m³
Gross weight 3 965
Loads on front wheels 2 180
Loads on rear wheels 6 000
Curb weight 8 180
Tank material
Steel 09G2S
Dencity of the product
0,74 t / m³
Gross weight
3 965
Loads on front wheels
2 180
Loads on rear wheels
6 000
Curb weight
8 180
Overall dimensions, mm

2 650

2 270

6 550

Standard equipment:
Aluminum caps of necks (Russia)
The breather valve for each compartment "Prompribor" (Livny)
Ball Valves
Suction and pressure suction sleeves Gassoflex (Spain)
Quick-release couplings Elaflex (Germany)
Plastic cases for pressure-suction hoses
2 fire extinguishers
Plastic case for fire extinguishers
Plastic wheel chocks
Distributing sleeve, pistol A-50M, counter PPO-25
Coloring paintwork Yaroslavl paints
Additional equipment:
Vapor Recovery and Lower Loading System - Prompribor, СIVACON, Sening
Aluminum Caps Cover
Environmental box to prevent cross-strait product
Suction and pressure hoses Elaflex
Quick coupling Kamlok
Pumps Sening, Alfons Haar, SAMPI
Capabilities:
Production of a tank of stainless steel 12H18N10T, AMG5M.
Coloring with imported enamels Dupont, Sikkens, Prospectrum Coating BVBA, applying color schemes on the color map.
Other Refuellers
Did not find a suitable model?
GRAZ plant is one of the few enterprises in the country where made vehicles for any of clients requirements.
Wide options for the tank configuration:
— change of cargo volume;
— change the number of compartments;
— case-shaped or round section;
— imported or domestic components;
— an additional calibration ruler;
— lower or upper tank’s filling;
— with or without recuperation;
— solid or one-sided box;
— draining to either side;
— presence or absence of tank’s additional booster amplifiers.
You can leave a request, specifying all the parameters you are interested in, and we will calculate the exact configuration that suits you
Added to comparison: Топливозаправщик АТЗ 36135-0000011