Products

Submitted
Thank you for your request. Our managers will contact you as soon as possible
Закрыть

ATZ 36135-0000011, 33098

Add to Comparison Order
Version for Print
Description
Characteristics
Pickings
Сapacity
4,9 м³
Section
Ellipse of constant section
Compartment
1–2
Chassis
GAZ-33098
The ATZ 36135-0000011 automobile fuel tanker is intended for transportation, short-term storage and filling with light oil products with a density of not more than 0.83 t / m3 and is a measure of the total capacity. The tank has flat-flanged bottoms and the same form of stiffeners (breakwaters) inside the hull. This design prevents the occurrence ofhydraulic shocks. To eliminate the formation of air cavities when filling the tank with fuel along the upper forming tank, there are installed air vent tubes, the ends of which are led out to each neck above the measuring square.
Tank material Steel 09G2S
Dencity of the product 0,74 t / m³
Gross weight 3 965
Loads on front wheels 2 230
Loads on rear wheels 6 050
Curb weight 8 180
Tank material
Steel 09G2S
Dencity of the product
0,74 t / m³
Gross weight
3 965
Loads on front wheels
2 230
Loads on rear wheels
6 050
Curb weight
8 180
Overall dimensions, mm

2 650

2 270

6 550

Standard equipment:

Aluminum caps of necks (Russia)
The breather valve for each compartment "Prompribor" (Livny)
Ball Valves
Suction and pressure suction sleeves Gassoflex (Spain)
Quick-release couplings Elaflex (Germany)
Plastic cases for pressure-suction hoses
2 fire extinguishers
Plastic case for fire extinguishers
Plastic wheel chocks
Distributing sleeve, pistol A-50M, counter PPO-25
Coloring LKP Yaroslavl paints
Additional equipment:
Vapor Recovery and Lower Loading System - Prompribor, СIVACON, Sening
Aluminum Caps Cover
Environmental box to prevent cross-strait product
Suction and pressure hoses Elaflex
Quick coupling Kamlok
Pumps Sening, Alfons Haar, SAMPI
Capabilities:
Productione of a tank of stainless steel 12H18N10T, AMG5M.
Coloring with imported enamels Dupont, Sikkens, Prospectrum Coating BVBA, applying color schemes on the color map.
Other Refuellers
Did not find a suitable model?
GRAZ plant is one of the few enterprises in the country where made vehicles for any of clients requirements.
Wide options for the tank configuration:
— change of cargo volume;
— change the number of compartments;
— case-shaped or round section;
— imported or domestic components;
— an additional calibration ruler;
— lower or upper tank’s filling;
— with or without recuperation;
— solid or one-sided box;
— draining to either side;
— presence or absence of tank’s additional booster amplifiers.
You can leave a request, specifying all the parameters you are interested in, and we will calculate the exact configuration that suits you
Added to comparison: Топливозаправщик АТЗ 36135-0000011